• MS series High Voltage Film Capacitor

MS series High Voltage Film Capacitor

  • Series: MS
  • Working Voltage Range: 4000V to 15000 VDC
  • Capacitance Range: 0.0015 to 0.47μF
  • Working Temperature: -45℃~+ 85℃
  • Load Life: 100,000 hours at Un and 70 °C (Hotspot temperature)
  • Application: High Voltage Circle

  (※Click this button to inquiry)

Download Product Manual (PDF file) Send an E-mail to us!

■ Product's Introduction

MS series High Voltage Film Capacitor

GENERAL TECHNICAL CHARACTERISTICS

Reference standards : IEC 61071-60068

Dielectric : Polypropylene film

Construction :  Extended metallized film

Coating : Polyester tape wrapping, UL94V-0 material end fill. Dry construction

Leads:  Tinned copper wire

 

ELECTRICAL CHARACTERISTICS

Operating temperature range : - 40 to + 85 ˚C(case)

Capacitance : 0.0015    to 0.47μF

Rated Voltage : 4KV to 15K VDC

Tolerance : ± 5% , ± 10%

Dissipation factor:  ≤8×10-4  Measured at 1000±20 Hz and 20±5˚C

Life expectancy : 100,000 hours at Un and 70 ˚C (Hotspot temperature)
 

TEST METHODS AND PERFORMANCES

Dielectric strength: 1.5Un (DC) applied to 10s at 20±5˚C 

Test voltage terminal to case : (1.5×Un+1000)Vac,Min 3000Vac,for 60s 

Insulation resistance :  30000s but need not exceed 30GΩ,(typical value), after 1 minute of electrification at 100VDC (20±5˚C )

 
■ Specification
 
Ordering Code Cap Dimension (mm)  du/dt Ipeak Urms
(μF) L D d (v/μs) (A) (VAC)
Un 4000 VDC , Us 6000 VDC       
MS-4000-0.033-44 0.033 44 12.0 0.8 600 19.8 1600
MS-4000-0.047-44 0.047 44 14.0 0.8 600 28.2 1600
MS-4000-0.068-44 0.068 44 16.5 1.0 600 40.8 1600
MS-4000-0.10-44 0.10 44 19.5 1.0 600 60 1600
MS-4000-0.15-44 0.15 44 23.5 1.2 600 90 1600
MS-4000-0.22-44 0.22 44 28.0 1.2 600 132 1600
MS-4000-0.33-44 0.33 44 34.5 1.2 600 198 1600
MS-4000-0.47-44 0.47 44 40.5 1.2 600 282 1600
Un 5000 VDC , Us 7500 VDC
MS-5000-0.022-44 0.022 44 12.5 0.8 700 15.4 2000
MS-5000-0.033-44 0.033 44 14.5 0.8 700 23.1 2000
MS-5000-0.047-44 0.047 44 17.0 1.0 700 32.9 2000
MS-5000-0.068-44 0.068 44 20.0 1.0 700 47.6 2000
MS-5000-0.10-44 0.10 44 24.0 1.2 700 70 2000
MS-5000-0.15-44 0.15 44 29.0 1.2 700 105 2000
MS-5000-0.22-44 0.22 44 35.0 1.2 700 154 2000
MS-5000-0.33-44 0.33 44 42.5 1.2 700 231 2000
Un 6000 VDC , Us 9000 VDC
MS-6000-0.033-57 0.033 57 14.5 0.8 900 29.7 2400
MS-6000-0.047-57 0.047 57 17.0 0.8 900 42.3 2400
MS-6000-0.068-57 0.068 57 19.5 1.0 900 61.2 2400
MS-6000-0.082-57 0.082 57 21.5 1.2 900 73.8 2400
MS-6000-0.10-57 0.10 57 23.5 1.2 900 90 2400
MS-6000-0.15-57 0.15 57 28.5 1.2 900 135 2400
MS-6000-0.22-57 0.22 57 34.5 1.2 900 198 2400
MS-6000-0.33-57 0.33 57 41.5 1.2 900 297 2400
Un 8000 VDC , Us 12000 VDC
MS-8000-0.0033-50 0.0033 50 10.5 0.8 1200 3.96 3200
MS-8000-0.0047-50 0.0047 50 12.0 0.8 1200 5.64 3200
MS-8000-0.0068-50 0.0068 50 14.0 0.8 1200 8.16 3200
MS-8000-0.0082-50 0.0082 50 15.0 0.8 1200 9.84 3200
MS-8000-0.010-50 0.010 50 16.0 1.0 1200 12 3200
MS-8000-0.015-50 0.015 50 19.5 1.0 1200 18 3200
MS-8000-0.022-50 0.022 50 23.0 1.2 1200 26.4 3200
MS-8000-0.033-50 0.033 50 28.0 1.2 1200 39.6 3200
MS-8000-0.047-50 0.047 50 33.0 1.2 1200 56.4 3200
MS-8000-0.047-80 0.047 80 21.0 1.2 1100 51.7 3200
MS-8000-0.068-80 0.068 80 24.5 1.2 1100 74.8 3200
MS-8000-0.10-80 0.10 80 29.0 1.2 1100 110 3200
MS-8000-0.15-80 0.15 80 34.5 1.2 1100 165 3200
MS-8000-0.22-80 0.22 80 41.0 1.2 1100 242 3200
Un 10000 VDC , Us 15000 VDC
MS-10000-0.0047-60 0.0047 60 12 0.8 1500 7.05 4000
MS-10000-0.0068-60 0.0068 60 13.5 0.8 1500 10.2 4000
MS-10000-0.010-60 0.010 60 16 1.0 1500 15 4000
MS-10000-0.015-60 0.015 60 19 1.0 1500 22.5 4000
MS-10000-0.022-60 0.022 60 23 1.2 1500 33 4000
MS-10000-0.033-60 0.033 60 27.5 1.2 1500 49.5 4000
MS-10000-0.047-60 0.047 60 32.5 1.2 1500 70.5 4000
Un 15000 VDC , Us 22500 VDC       
MS-15000-0.0022-60 0.0022 60 12 0.8 2000 4.4 6000
MS-15000-0.0033-60 0.0033 60 14 0.8 2000 6.6 6000
MS-15000-0.0047-60 0.0047 60 16.5 1.0 2000 9.4 6000
MS-15000-0.0068-60 0.0068 60 19.5 1.2 2000 13.6 6000
MS-15000-0.010-60 0.010 60 23 1.2 2000 20 6000
MS-15000-0.015-60 0.015 60 28 1.2 2000 30 6000
MS-15000-0.022-60 0.022 60 33.5 1.2 2000 44 6000

Above is gerneral purpose specificaton, we can custom design according to customers' requirement.
More specification please inquiry us.


■ How To Order
Send us ORDER CODE for quote.

 

Click to search products

INQUIRY

Send your message to us. We'll respond as soon as possible.

E-mail will not be published (required)
Name (optional)
Tel (optional)
Company (optional)
Address (optional)
点击刷新验证码

Message (required)