5.5V Radial Leads Ultracapacitors PET Tube

5.5V Radial Leads Ultracapacitors/Supercapacitor 5.5V electrical double-layer capacitor

Feature:
● High energy density, High power
● Long cyclelife
● Maintenance-free

Application:
● Electrictool, Consumer electronics
● Solar streetlight
● Energy recovery
● Main power, Back up power

Rated Voltage (V)	øDxL (mm)	ESR 1kHz mΩ	ESR (mΩ)	Maximum Endurance Current(A)	Maximum Peak Current(A)	Maximum Leakage Current (72hrs/mA)	Power Density (W/kg	Maximum Energy (W.h)	Energy Density (Wh/kg)	Part number
5.5V 0.47F	16x8x14	300	600	0.38	0.99	0.002	3184	0.0020	1.0	SRH05R5S0R47DARA0
5.5V 0.47F	16x8x14	300	600	0.38	0.99	0.006	3184	0.0020	1.0	SRH05R5S0R47DARB0
5.5V 1F	16x8x18	250	500	0.49	1.73	0.006	3086	0.0042	1.8	SRH05R5S0001DARA0
5.5V 1F	16x8x18	250	500	0.49	1.73	0.010	3086	0.0042	1.8	SRH05R5S0001DARB0
5.5V 1.5F	16x8x22	200	400	0.56	2.40	0.010	3479	0.0063	2.4	SRH05R5S01R5DARA0
5.5V 1.5F	16x8x22	200	400	0.56	2.40	0.015	3479	0.0063	2.4	SRH05R5S01R5DAAB0
5.5V 2.5F	20x10x22	180	360	0.79	3.65	0.02	2396	0.0105	2.5	SRH05R5S02R5DARA0
5.5V 2.5F	20x10x22	180	360	0.79	3.65	0.025	2396	0.0105	2.5	SRH05R5S02R5DARB0
5.5V 3.5F	20x 10x27	160	320	0.93	4.61	0.023	2063	0.0147	2.7	SRH05R5S03R5DARA0
5.5V 3.5F	20x 10x27	160	320	0.93	4.61	0.028	2063	0.0147	2.7	SRH05R5S03R5DARB0
5.5V 5F	25x12.5x22	120	200	1.35	7.71	0.025	2606	0.021	3.0	SRH05R5S0005DARA0
5.5V 5F	25x12.5x22	120	200	1.35	7.71	0.03	2606	0.0210	3.0	SRH05R5S0005DARB0
5.5V 7.5F	25x12.5x32	100	160	1.8	10.66	0.065	2396	0.0315	3.3	SRH05R5M07R5DARA0
5.5V 7.5F	25x12.5x32	100	160	1.80	10.66	0.070	2396	0.0315	3.3	SRH05R5M07R5DAAB0
5.5V 12.6F	32x16x28	70	120	2.09	15.00	0.090	1962	0.0525	3.4	SRH05R5M12R5DAAA0
5.5V 12.6F	40x18x28	70	120	2.09	15.00	0.095	1962	0.0525	3.4	SRH05R5M12R5DAAD0

Datasheet(PDF) of 5.5V Radial Leads Supercapacitor, please contact us.

Send us the Part Number, for example, SRH2R7M506RS1840.

---

Handling Precautions and Guidelines:

For safety application, please contact us directly for any technical specifications, handling precautions and guidelines critical to application.
1.1 Precautions
(1) Prohibition of disassembly
    The disassembling may generate internal short circuit in the cell, which may cause gassing, leakage, explosion, or other problems.
    Electrolyte is harmful: In case the electrolyte come into contact with the skin, or eyes, physicians shall flush the electrolyte immediately with fresh  
    water and medical advice is to be sought. 
(2) Prohibition of dumping of cells into fire
      These may cause explosion of the cells, which is very dangerous and is prohibited.
(3) Prohibition of cells immersion into liquid
     The cells shall never be soaked with liquids such as water, seawater, drinks such as juices, coffee or others.
(4) Prohibition of use of damaged cells
      The cells might be damaged during shipping by shock. If any abnormal features of the cells are found such as damages in the cell package,      smelling of an electrolyte, an electrolyte leakage and others, the cells shall never be used any more.
       The Cells with a smell of the electrolyte or a leakage shall be placed away from fire to avoid firing or explosion

1.2 Handling Guidelines
(1) It is not suitable that cell is used under such conditions: AC circuit and wave filtering.
(2) Work voltage of cell should not exceed Max. work voltage of cell during using. Otherwise, will shorten shelf life,even cause swelling, leakage or crack.
(3) Please check the polarity before using. If working under reverse polarity, cell will not only shorten shelf life, but also heavy damage, such as swelling, electrolyte leakage etc.
(4) Environment
Work temperature will have an influence on shelf life of cell. As usual, higher work temperature will shorten shelf life. So, it is better that cell works under as possible as low environmental temperature.Work temperature of cell should consider internal work temperature in the unit and temperature rise when cellworks.
(5) IR drop
When main power sources shut down, cell will change into work mode from failure mode, at the same time, OCV will decrease due to IR drop. So please choose proper product type according to impedance specified in product datasheet and applied current.
(6) Cells in series connection
When cells in series connection for higher work voltage, it should be assured that work voltage of any single cell must not exceed Max. work voltage of single cell, otherwise, will shorten shelf life, even cause swelling, leakage or crack.
(7) Soldering
Heat shock will decrease electric performance of cell, even cause swelling, leakage or crack. Soldering temperature should not exceed 230℃, soldering time should not exceed 5s.
(8) Please don’t use reflow soldering of infrared heating and air heating.
Tags: 5.5V 0.47F, 1F, 1.5F, 2.5F, 3.5F, 5F, 7.5F, 12.6F Radial Leads Ultracapacitors/Supercapacitor.