• BSMJ/BCMJ/BZMJ Three Phases Power Capacitor
  • BSMJ/BCMJ/BZMJ Three Phases Power Capacitor

BSMJ/BCMJ/BZMJ Three Phases Power Capacitor

  • Series: BSMJ/BCMJ/BZMJ
  • Working Voltage Range: 230V, 400V, 525V, 690V, 750V, 1050V, 1200VAC
  • Capacitance Range: 11uF~577.4uF
  • Working Temperature: -25~50℃
  • Load Life: -
  • Application: Low voltage power network to improve power factor, reduce reactive loss and better the voltage quality.

  (※Click this button to inquiry)

Download Product Manual (PDF file) Send an E-mail to us!

■ Product's Introduction

Box type BSMJ three phases Power Capacitor 0.45/0.48/0.525kV Self-healing low-voltage parallel capacitors

Overview
The capacitors are mainly used to improve the power factor of power frequency power systems,Improve the quality of power grid and increase the reliability of electricity.
The shell is made of round aluminum material, which has good heat dissipation. The shell is more environmentally friendly without painting.Easy installation, small footprint, and saving space.

Technical Parameter
Rated voltage: 230VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC, 1200VAC
Rated output:
1-60 KVAR
Rated frequency:
50Hz or 60Hz
Capacitance Tolerance:
-5% - +10%
Self-healing property: Good self-healing property, automatically recovery insulation performance.
Tolerance: not more than -2~+3% of the rated value.
Low loss: not more than 0.001 (@power frequency rated voltage, 20°C).
Overvoltage ability: long-term operation under 1.1 Un.
Overcurrent ability: long-term operation under 1.3 In.
Withstand voltage: 2.15Un applied pole to pole, 2S no breakdown;
                                    Apply 3.5kVac to the shell, 10S will not break down.
Protection mechanism: pressure protection device inside.
Executive standard: GB/T12747-2017
                                      "Self-healing low-voltage parallel capacitors" and IEC60831.

■ Specification

Rated
Voltage
(kV)
Rated
Output (kvar)
Rated
Capacitor
(uF)
Rated
Current
(A)
H
(mm)
Output
Terminal
Shell
Type
Model BSMJ Model
BCMJ
Model BZMJ
 0.4  1  19.9  1.4  105  M6  A1 BSMJ-0.4-1-3 BCMJ-0.4-1-3 BZMJ-0.4-1-3
 0.4  2  39.8  2.9  105  M6  A1  BSMJ-0.4-2-3  BCMJ-0.4-2-3  BZMJ-0.4-2-3
 0.4  3  59.7  4.3  125  M6  A2  BSMJ-0.4-3-3  BCMJ-0.4-3-3  BZMJ-0.4-3-3
 0.4  4  79.6  5.8  125  M6  A2  BSMJ-0.4-4-3  BCMJ-0.4-4-3  BZMJ-0.4-4-3
 0.4  5  99.5  7.2  125  M6  A2  BSMJ-0.4-5-3  BCMJ-0.4-5-3  BZMJ-0.4-5-3
 0.4  6  119.4  8.7  125  M6  A2  BSMJ-0.4-6-3  BCMJ-0.4-6-3  BZMJ-0.4-6-3
 0.4  7.5  149.2  10.8  125  M6  A2  BSMJ-0.4-7.5-3  BCMJ-0.4-7.5-3  BZMJ-0.4-7.5-3
 0.4  8  159.2  11.6  125  M6  A2  BSMJ-0.4-8-3  BCMJ-0.4-8-3  BZMJ-0.4-8-3
 0.4  10  198.9  14.4  180  M6  A2  BSMJ-0.4-10-3  BCMJ-0.4-10-3  BZMJ-0.4-10-3
 0.4  12  238.7  17.3  180  M6  A2  BSMJ-0.4-12-3  BCMJ-0.4-12-3  BZMJ-0.4-12-3
 0.4  14  278.5  20.2  210  M6  A2  BSMJ-0.4-14-3  BCMJ-0.4-14-3  BZMJ-0.4-14-3
 0.4  15  298.4  21.7  210  M6  A2  BSMJ-0.4-15-3  BCMJ-0.4-15-3  BZMJ-0.4-15-3
 0.4  16  318.3  23.1  210  M6  A2  BSMJ-0.4-16-3  BCMJ-0.4-16-3  BZMJ-0.4-16-3
 0.4  18  358.1  26.0  245/210  M6  A2/B2  BSMJ-0.4-18-3  BCMJ-0.4-18-3  BZMJ-0.4-18-3
 0.4  20  397.9  28.9  245/210  M6  A2/B2  BSMJ-0.4-20-3  BCMJ-0.4-20-3  BZMJ-0.4-20-3
 0.4  22  437.7  31.8  210  M8  B2  BSMJ-0.4-22-3  BCMJ-0.4-22-3  BZMJ-0.4-22-3
 0.4  24  477.5  34.6  210  M8  B2  BSMJ-0.4-24-3  BCMJ-0.4-24-3  BZMJ-0.4-24-3
 0.4  25  497.4  36.1  210  M8  B2  BSMJ-0.4-25-3  BCMJ-0.4-25-3  BZMJ-0.4-25-3
 0.4  28  557.3  40.4  260  M8  B2  BSMJ-0.4-28-3  BCMJ-0.4-28-3  BZMJ-0.4-28-3
 0.4  30  596.8  43.3  260  M8  B2  BSMJ-0.4-30-3  BCMJ-0.4-30-3  BZMJ-0.4-30-3
 0.4  35  696.3  50.5  260  M8  B2  BSMJ-0.4-35-3  BCMJ-0.4-35-3  BZMJ-0.4-35-3
 0.4  40  796.2  57.7  320  M8  B2  BSMJ-0.4-40-3  BCMJ-0.4-40-3  BZMJ-0.4-40-3
 0.4  45  895.2  65.0  210  M10  C  BSMJ-0.4-45-3  BCMJ-0.4-45-3  BZMJ-0.4-45-3
 0.4  50  995.2  72.2  210  M10  C  BSMJ-0.4-50-3  BCMJ-0.4-50-3  BZMJ-0.4-50-3
 0.4  55  1094.2  79.4  260  M10  C  BSMJ-0.4-55-3  BCMJ-0.4-55-3  BZMJ-0.4-55-3
 0.4  60  1194.3  86.6  260  M10  C  BSMJ-0.4-60-3  BCMJ-0.4-60-3  BZMJ-0.4-60-3
 0.45  1  15.7  1.3  105  M6  A1  BSMJ-0.45-1-3  BCMJ-0.45-1-3  BZMJ-0.45-1-3
 0.45  2  31.4  2.6  105  M6  A1  BSMJ-0.45-2-3  BCMJ-0.45-2-3  BZMJ-0.45-2-3
 0.45  3  47.2  3.8  125  M6  A2  BSMJ-0.45-3-3  BCMJ-0.45-3-3  BZMJ-0.45-3-3
 0.45  4  62.9  5.1  125  M6  A2  BSMJ-0.45-4-3  BCMJ-0.45-4-3  BZMJ-0.45-4-3
 0.45  5  78.6  6.4  125  M6  A2  BSMJ-0.45-5-3  BCMJ-0.45-5-3  BZMJ-0.45-5-3
 0.45  6  94.3  7.7  125  M6  A2  BSMJ-0.45-6-3  BCMJ-0.45-6-3  BZMJ-0.45-6-3
 0.45  7.5  117.9  9.6  125  M6  A2  BSMJ-0.45-7.5-3  BCMJ-0.45-7.5-3  BZMJ-0.45-7.5-3
 0.45  8  125.8  10.3  125  M6  A2  BSMJ-0.45-8-3  BCMJ-0.45-8-3  BZMJ-0.45-8-3
 0.45  10  157.2  12.8  180  M6  A2  BSMJ-0.45-10-3  BCMJ-0.45-10-3  BZMJ-0.45-10-3
 0.45  12  188.6  15.4  180  M6  A2  BSMJ-0.45-12-3  BCMJ-0.45-12-3  BZMJ-0.45-12-3
 0.45  14  220.1  18.0  210  M6  A2  BSMJ-0.45-14-3  BCMJ-0.45-14-3  BZMJ-0.45-14-3
 0.45  15  235.8  19.2  210  M6  A2  BSMJ-0.45-15-3  BCMJ-0.45-15-3  BZMJ-0.45-15-3
 0.45  16  251.5  20.5  210  M6  A2  BSMJ-0.45-16-3  BCMJ-0.45-16-3  BZMJ-0.45-16-3
 0.45  18  282.9  23.1  245/210  M6  A2/B2  BSMJ-0.45-18-3  BCMJ-0.45-18-3  BZMJ-0.45-18-3
 0.45  20  314.4  25.7  245/210  M6  A2/B2  BSMJ-0.45-20-3  BCMJ-0.45-20-3  BZMJ-0.45-20-3
 0.45  22  345.8  28.3  210  M8  B2  BSMJ-0.45-22-3  BCMJ-0.45-22-3  BZMJ-0.45-22-3
 0.45  24  377.3  30.8  210  M8  B2  BSMJ-0.45-24-3  BCMJ-0.45-24-3  BZMJ-0.45-24-3
 0.45  25  393.2  32.1  210  M8  B2  BSMJ-0.45-25-3  BCMJ-0.45-25-3  BZMJ-0.45-25-3
 0.45  28  440.3  35.9  210  M8  B2  BSMJ-0.45-28-3  BCMJ-0.45-28-3  BZMJ-0.45-28-3
 0.45  30  471.8  38.5  210  M8  B2  BSMJ-0.45-30-3  BCMJ-0.45-30-3  BZMJ-0.45-30-3
 0.45  35  550.2  44.9  260  M8  B2  BSMJ-0.45-35-3  BCMJ-0.45-35-3  BZMJ-0.45-35-3
 0.45  40  629.1  51.3  260  M8  B2  BSMJ-0.45-40-3  BCMJ-0.45-40-3  BZMJ-0.45-40-3
 0.45  45  707.4  57.7  210  M10  C  BSMJ-0.45-45-3  BCMJ-0.45-45-3  BZMJ-0.45-45-3
 0.45  50  786.3  64.2  210  M10  C BSMJ-0.45-50-3 BCMJ-0.45-50-3 BZMJ-0.45-50-3
 0.45  55  864.5  70.6  210  M10  C BSMJ-0.45-55-3 BCMJ-0.45-55-3 BZMJ-0.45-55-3
 0.45  60  943.6  77.0  210  M10  C BSMJ-0.45-60-3 BCMJ-0.45-60-3 BZMJ-0.45-60-3
 0.525  5  57.7  5.5  125  M6  A2 BSMJ-0.525-5-3 BCMJ-0.525-5-3 BZMJ-0.525-5-3
 0.525  10  115.5  11.0  180  M6  A2 BSMJ-0.525-10-3 BCMJ-0.525-10-3 BZMJ-0.525-10-3
 0.525  15  173.2  16.5  210  M6  A2 BSMJ-0.525-15-3 BCMJ-0.525-15-3 BZMJ-0.525-15-3
 0.525  16  184.8  17.6  210  M6  A2 BSMJ-0.525-16-3 BCMJ-0.525-16-3 BZMJ-0.525-16-3
 0.525  18  207.9  19.8  210  M6  B2 BSMJ-0.525-18-3 BCMJ-0.525-18-3 BZMJ-0.525-18-3
 0.525  20  231.0  22.0  210  M6  B2 BSMJ-0.525-20-3 BCMJ-0.525-20-3 BZMJ-0.525-20-3
 0.525  25  288.7  27.5  210  M8  B2 BSMJ-0.525-25-3 BCMJ-0.525-25-3 BZMJ-0.525-25-3
 0.525  30  346.5  33.0  260  M8  B2 BSMJ-0.525-30-3 BCMJ-0.525-30-3 BZMJ-0.525-30-3
 0.525  40  461.9  44.0  320  M8  B2 BSMJ-0.525-40-3 BCMJ-0.525-40-3 BZMJ-0.525-40-3
 0.525  50  577.4  55.0  210  M10  C BSMJ-0.525-50-3 BCMJ-0.525-50-3 BZMJ-0.525-50-3
 0.525  60  692.9  66.0  260  M10  C BSMJ-0.525-60-3 BCMJ-0.525-60-3 BZMJ-0.525-60-3
 0.69  5  33.4  4.2  125  M6  A2 BSMJ-0.69-5-3 BCMJ-0.69-5-3 BZMJ-0.69-5-3
 0.69  10  66.9  8.4  180  M6  A2 BSMJ-0.69-10-3 BCMJ-0.69-10-3 BZMJ-0.69-10-3
 0.69  15  100.3  12.6  210  M6  A2 BSMJ-0.69-15-3 BCMJ-0.69-15-3 BZMJ-0.69-15-3
 0.69  16  107.0  13.4  210  M6  A2 BSMJ-0.69-16-3 BCMJ-0.69-16-3 BZMJ-0.69-16-3
 0.69  20  133.8  16.7  210  M6  B2 BSMJ-0.69-20-3 BCMJ-0.69-20-3 BZMJ-0.69-20-3
 0.69  25  167.2  20.9  210  M6  B2 BSMJ-0.69-25-3 BCMJ-0.69-25-3 BZMJ-0.69-25-3
 0.69  30  200.7  25.1  260  M8  B2 BSMJ-0.69-30-3 BCMJ-0.69-30-3 BZMJ-0.69-30-3
 0.69  40  267.4  33.5  320  M8  B2 BSMJ-0.69-40-3 BCMJ-0.69-40-3 BZMJ-0.69-40-3
 0.69  50  334.3  41.9  210  M10  C BSMJ-0.69-50-3 BCMJ-0.69-50-3 BZMJ-0.69-50-3
 0.69  60  401.1  50.2  260  M10  C BSMJ-0.69-60-3 BCMJ-0.69-60-3 BZMJ-0.69-60-3
 1.2  5  11.0  2.4  180  M6  A2 BSMJ-1.2-5-3 BCMJ-1.2-5-3 BZMJ-1.2-5-3
 1.2  10  22.0  4.8  210  M6  A2 BSMJ-1.2-10-3 BCMJ-1.2-10-3 BZMJ-1.2-10-3
 1.2 15   33.2  7.2 245  M6   A2 BSMJ-1.2-15-3 BCMJ-1.2-15-3 BZMJ-1.2-15-3
 1.2  20  44.2  9.6  210  M6  B2 BSMJ-1.2-20-3 BCMJ-1.2-20-3 BZMJ-1.2-20-3
 1.2  25  55.3  12  210  M6  B2 BSMJ-1.2-25-3 BCMJ-1.2-25-3 BZMJ-1.2-25-3
 1.2  30  66.3  14.4  210  M10  C BSMJ-1.2-30-3 BCMJ-1.2-30-3 BZMJ-1.2-30-3
 1.2  40  88.4  19.2  210  M10  C BSMJ-1.2-40-3 BCMJ-1.2-40-3 BZMJ-1.2-40-3
 1.2  50  110.5  24.1  210  M10  C BSMJ-1.2-50-3 BCMJ-1.2-50-3 BZMJ-1.2-50-3

Draw
box-type-bsmj-three-phases-7

 More specification please refer to our datasheet.
BSMJ CAPACITOR

■ How To Order
Send us the Part Number, for example, BSMJ-0.69-25-3.

Requirements
The altitude of the installation and operation area should not exceed 2000m, and the ambient air temperature during use should be -25~+55℃. The installation and operation site should be free of harmful gases and steam,and there should be no conductive or explosive dust. The installation and operation site should be free of severe mechanical vibration. When the capacitor is put into operation, a special capacitor contactor with a current limiting device or a non-contact switch that is used when the voltage crosses zero should be used. A reactor can also be connected in series to the capacitor to avoid early damage to the capacitor. The magnitude of the inrush current should be limited to 100 times the rated current.

Click to search products

INQUIRY

Send your message to us. We'll respond as soon as possible.

E-mail will not be published (required)
Name (optional)
Tel (optional)
Company (optional)
Address (optional)
点击刷新验证码

Message (required)